RS Subwoofers

Who are we to judge? Some just wants it louder, not caring about the optics or other things that might harm the score! Therefore a revised version of the HD came....

The RS motors incorporates increased cooling, triple stacked 120 Oz magnets, wide tinsel leads woven into the mulitlayer nomex spider which accomodates the 3" flat wire aluminum voice coil.

Kevlar & NPP are the key ingredients of the lightweight cone. Although costly, the benefit is a stiffer & stronger cone. This is essential for the last tenths that seperates winners from runner ups.

To customize your woofer & acheive the best load for your set up, recones are available in the following impedances.

DVC 0.7 Ω / DVC 1 Ω / DVC 1.4 Ω / DVC 2 Ω.

                                           RS12                      RS18

Power handling*:                   5500 wrms              5500 wrms
Sensitivity :                           92,5 dB                   93,1 dB 
Nominal impedance:              Dual 1.4Ω               Dual 1.4Ω
X-Max:                                  40 mm                   40 mm
Equivalent Compliance (Vas):  -                           109,9 L
Free Air Resonance (Fs):        -                           36,7 Hz
Electrical “Q” (Qes):                -                           0,82
Mechanical “Q” (Qms):            -                           3,38
Total Speaker “Q” (Qts):          -                           0,67
DC Resistance (Re):             1.4 Ω                      1.4 Ω
Magnet weigth (Oz):              3 x 120 Oz              3 x 120 Oz

*It is essential that our woofers are given time to allow the suspension to soften up. Depending on usage, this may take several weeks. While this process is undergoing, it is not recommended to apply full amplification power according to the woofers specs. Once the moving parts have been broken in, the performance of your subwoofer will increase.

                                                               © B² audio